Actchem™ 45 Product Range
Actchem 45 product range is presented in different forms:-
Hand Placed & Gunning: Easy to install with steel fibres.
Vibrocast: Ball-in-Hand consistency for minimum vibration.
Trueflow: Free-flowing, self de-airing for easy installation.
Actchem 45 product range utilizes the same proven, unique Actchem Binder system. This system permits wide water ranges, giving working times of 40-60 minutes, early high strength and low abrasion resistance.
Typical Data
ACT 45 | ACT 45 | ACT 45 VC | ACT 45 VC | ACT 45 TF | ACT 45 TF | |
350°C | 815°C | 350°C | 815°C | 350°C | 815°C | |
DENSITY | 2.29 | 2.28 | 2.20 | 2.20 | 2.16 | 2.12 |
C.C.S. kg/cm² | 900 | 1200 | 1100 | 1200 | 1400 | 1400 |
Abrasion Loss cm³ | 5.40 | 4.00 | 5.0 | 4.0 | 3.80 | 4.50 |
P.L.C. % | -0.22 | -0.25 | -0.10 | -0.22 | -0.30 | -0.30 |
M.O.R. N/mm² | 25.0 | 20.0 | 22.0 | 21.0 | 17.0 | 15.0 |
Water Demand | 6-7% | 5-6% | 9-10% |
Thermal Conductivity @ 815ºC is 1.0 W/M.k
Typical Applications
F.C.C.U. cold wall Catalyst Transfer Lines, Reactor Riser Lines, External Cyclones and Air Distribution Systems.
Fluidised Bed Boilers, Steel Plants, Aluminium, Incineration Units, Cement.
The above physical and chemical properties as stated are average as tested in a laboratory per ASTM procedures. Information is supplied as a technical service only and should be used accordingly. Licensed by Actchem Inc., Dramicom is the exclusive manufacturer and distributor of Actchem Products in Europe, Middle East, Far East, India and China.