Actchem™ 75 Product Range
Actchem 75 product range is presented in different forms:-
Hand Placed & Gunning: Easy to install with steel fibres.
Vibrocast: Ball-in-Hand consistency for minimum vibration.
Trueflow: Free-flowing, self de-airing for easy installation.
Actchem 75 product range utilizes the same proven, unique Actchem Binder system. This system permits wide water ranges, working times of 40-60 minutes, early high strength and low abrasion resistance.
Typical Data
| ACT 75 | ACT 75 | ACT 75 VC | ACT 75 VC | ACT 75 TF | ACT 75 TF | |
| 350°C | 815°C | 350°C | 815°C | 350°C | 815°C | |
| DENSITY | 2.73 | 2.73 | 2.50 | 2.45 | 2.55 | 2.50 |
| C.C.S. kg/cm² | 1500 | 1500 | 1000 | 1300 | 1400 | 1800 |
| Abrasion Loss cm³ | 2.90 | 2.80 | 3.0 | 3.0 | 2.80 | 2.50 |
| P.L.C. % | -0.1 | -0.3 | -0.1 | -0.3 | -0.1 | -0.3 |
| M.O.R. N/mm² | 34 | 35 | 18 | 20 | 30 | 20 |
| Water Demand | 5-6% | 7-8% | 7-8% |
Thermal Conductivity @ 815ºC is 1.50-1.70 W/M.k
Typical Applications
F.C.C.U. Catalyst Transfer Lines, Reactor and Reactor Stripper Vessels, Cyclones and Air Distribution Systems.
Fluidised Bed Boilers, Steel Plants, Aluminium, Incineration Units, Cement.
Maximum Service Temperature 1250ºC.
The above physical and chemical properties as stated are average as tested in a laboratory per ASTM procedures. Information is supplied as a technical service only and should be used accordingly. Licensed by Actchem Inc., Dramicom is the exclusive manufacturer and distributor of Actchem Products in Europe, Middle East, Far East, India and China